Your Best High-dryness Steam Injection Boiler Manufacturer

High-dryness Steam Injection Boiler

Rated evaporation:9.2 t/h~30t/h
Rated steam pressure:10MPa~26 MPa
Rated steam temperature:390℃
Rated thermal efficiency:≥91%
Steam Dryness:＞85%
Fuel:Oil and Gas Dual Use
Control mode: PLC + touch screen + industrial computer
Loading mode: Trailer/Skid
Operative Mode: Subcritical/Supercritical

Sanjack Lift Solution: Your Premier Choice Of High-dryness Steam Injection Boiler

Sanjack Lift Solution is the No. 1 thermal recovery solution supplier in China with 20 years of experience. Sanjack Lift SolutionPetro can provide customers with a complete set of thermal recovery equipment from surface steam injection boilers to underground thermal recovery downhole pumps.

Sanjack Lift Solution: Your Best China High-dryness Steam Injection Boiler Manufacturer and Supplier

We can provide customers with the design, development, production, installation, commissioning, and stem injection services.

Sanjack Lift Solution: Your Best Place To choose High-dryness Steam Injection Boiler In China

In order to solve the problemsoftraditional boilers, we design the high dryness steam injection boiler according to the following.
By adding the superheated section coil, 75% of the dry steam from the radiation section will be heated in the convection section, so that the steam injection dryness can be as high as 85%; if the dryness of 75% remains unchanged, the energy absorbed in the superheated section is to reduce the fuel consumption; because the heat absorption of the steam with high dryness is carried out in the convection section, there is no scaling, the heat transfer effect is good, and the operation is safer. There absorption of heat in the superheated section can greatly reduce the exhaust gas temperature and improve the overall thermal efficiency of the boiler.

Sanjack Lift Solution: The Advantages With Us You Should Know

1) Enhanceddryness section can reduce the exhaust gas temperature of the steam injection boiler and improve the thermal efficiency of the boiler;
2) Dryness and oxygen content in flue gas are applied to ensure stable and balanced operation of thermal efficiency, so that steam injection boilers are always operating in a state of high thermal efficiency, achieving the purpose of energy saving and efficiency increase;
3) Only two rows of heat exchanger bare tubes are added to the unit, with the overall height raised by 550 mm. For the mobile steam injection boiler, it does not exceed the upper plane of the water-water heat exchanger and does not affect transportation.
4) The installation position of the device is relatively independent and located on the upper part of the transition section, which is convenient for maintenance and replacement.

Combined with the structural characteristics of the existing vertical convection section steam injection boilers, we add a enhanced drynesssection at the lower part of the original detachable convection section and the upper part of the transition section.

Two rows of bare tube are arranged in the lower part of the convection section to absorb the outlet flue gas temperature of the radiation section and to improve the feed water temperature and steam dryness of the convection heating surface of the oilfield injection boiler. The superheated section is located between the convection section and the transition section at a height of 550 mm, which ensures that the height of boiler transportation is not exceeded after the installation. The enhanced dryness section is staggered by 14 seamless steel pipes with 89*12. This arrangement increases the heating area without increasing the water resistance. The total weight of the superheated section is 2116 Kg and can be made removable and fixed as required. The legs of the overheated section are mounted on the legs of the transition section.